Lot-1879: Siemens 8DN8 72.5kV SF6 Gas Insulated Switchgear (QTY 2)

Lot-1879: Siemens 8DN8 72.5kV SF6 Gas Insulated Switchgear (QTY 2)

There are four GIS lineups, each with two bus sections (hence why some files and naming conventions may be divided into 8). The tech data is generally the same for each lineup. There are attachments regarding quantity, configurations, and schematics information available upon request.

The units went through factory testing and were then packaged to OEM storage standards.

Manufacturer: Siemens Energy Inc.

Year Manufactured: 2021

QTY: 2 units

Warranty: Not Available

Drawings: Available Upon Request

Equipment Description:

Siemens 8DN8 72.5kV SF6 gas insulated switchgear

Four switchgear assemblies, each with ten (10) bays, 40 bays total.

Unit factory testing was completed in August 2023, then dissembled and packaged for storage. They have not been put in service.

Technical Data:

72.5kV, 60Hz, nameplated for operation in the US

4000A bus bar rating, 4000A transformer feeder/coupler rating, 2500A feeder rating

40kA rated short-time withstand current

Materials of construction (for initial review only, not an exhaustive material list):

• Housing: Depending on their shape and size, the housings are made from cast aluminum, welded aluminum, or steel.
• Bussing: aluminum alloy
• Support structures: steel

GIS bay type and quantity (per each of four assemblies)

• 4000A transformer feeder breaker: 2
• 4000A bus coupler, non-CB type: 1
• 2500A feeder breaker, with double incoming cable disconnects: 6
• 2500A feeder breaker, single cable disconnect: 1

Units are without local control cubicles

Manufacturer datasheet: Siemens 8DN8 Datasheet

Load-out: Location will load assets onto buyer's transportation vehicle(s) free of charge. Location will support with loadout onto a buyer's truck or will ship to the buyer’s site. The related costs can be considered in the negotiation.

Please NOTE: the above listed quantities are believed to be an accurate representation of the available assets. It is the Buyer's responsibility to verify quantities at the time of pick up. No adjustments will be made for discrepancies within +/- 5% of the listed quantities. Any adjustments will need to be presented in writing to Requis on or before loadout. Please bid accordingly.

Buyer Premium: a 10% buyer premium will be added to bid amount and applied to final invoice. Please bid accordingly.

Conditions of Sale Agreement will be provided to the winning Buyer. The agreement must be signed by Buyer prior to release of assets.

For additional information please contact:

Loic Coyot, sales@requis.com, (281) 524-9263