Lot-2569 Ethylene Cracker Furnace Tube - Chrome Nickel Niobium (Quantity: 102 tons, Used)
TubularsnoneUsedKerteh, Terengganu, Malaysia
Lot #2569
1 / 6
Description
Lot-2569 Ethylene Cracker Furnace Tube - Chrome Nickel Niobium (Quantity: 102 tons, Used) Used ethylene cracker furnace tubes. Equivalent to 6 furnaces. 95% of the tubes are Chrome Nickel Niobium, 3% Stainless Steel. Items count: 2233. Breakdown available upon request. No MTRs available. Please see full lot inventory in the asset table below including all items and quantities. Buyer Premium: A 11% buyer premium will be added to the bid amount and applied to the final invoice. Please bid accordingly. Conditions of Sale Agreement will be provided to the winning Buyer. The agreement must be signed by the Buyer before the release of assets. NOTE: The above-listed quantities are believed to be an accurate representation of the available assets. It is the Buyer's responsibility to verify quantities at the time of pick up. No adjustments will be made for discrepancies within +/- 5% of the listed quantities. Any adjustments will need to be presented in writing to Requis on or before loadout. Please bid accordingly.
Assets in Lot42
| Name | Manufacturer | Model | SKU | Quantity | Units | Condition | Description |
|---|---|---|---|---|---|---|---|
| ANTI-SEIZE LUBRICANT (FOR MAX. TEMP. 1426°C) - Lummus Type 506 | — | — | — | 0 | kg | used | |
| WYE FITTING INTERMEDIATE ID=2x108/165.1 - 25Cr-35Ni-Nb - G 4852 MICRO | — | — | — | 0 | kg | used | |
| WASHER FOR THERMOWELL - ASTM A479 TP310S - AISI 310 | — | — | — | 2 | kg | used | |
| REDUCING ELBOW 90° WITH LUG (76.1/62.7) - ASTM A 351 CF8 - G 4827 | — | — | — | 1104 | kg | used | |
| SEAMLESS PIPE 2 1/2inch SCH.40 x 980.2 LONG - ASTM A312 TP 304H | — | — | — | 806 | kg | used | |
| SEAMLESS PIPE 6inch SCH.80 x 659 LONG - ASTM A312 TP 304H | — | — | — | 686 | kg | used | |
| SEAMLESS PIPE 6inch SCH.80/40 x 300 LONG - ASTM A312 TP 304H | — | — | — | 173 | kg | used | |
| CAP PLATE - ASTM A240 TYP 304H | — | — | — | 182 | kg | used | |
| Lug 12 THK - ASTM A240 TYP 304H | — | — | — | 74 | kg | used | |
| SOCKOLET - ASTM A479 TP304H | — | — | — | 14 | kg | used | |
| SEAMLESS PIPE 1inch-SCH.80 L=100 - ASTM A312 TP 304H | — | — | — | 8 | kg | used | |
| CONCENTRIC REDUCER 1inchx0.5inch SCH.80 acc ASME B16.9 - ASTM A403-304H | — | — | — | 5 | kg | used | |
| WNRF-FLANGE 0.5inch-300# acc. ASME B16.5 - ASTM A182-F304H | — | — | — | 19 | kg | used | |
| GASKET MADE FROM CERAMIC FIBRE BLANKET (128kg/m²) O.D.418mm x I.D.305mm x 13mm THICK - SPEC. TS.BA. 18.3.1 Cl.23 | — | — | — | 6 | kg | used | |
| SPIRAL WOUND GASKET 18inch-300# ACC. ASME B16.5 WITH OUTSIDE AND INNER STAINLESS STEEL GUIDE RING MAT.304 - HIGH OXIDATION RESISTANT GRAPHOIL TYPE GTK FILLER | — | — | — | 8 | kg | used | |
| CERAMIC FIBRE WOOL 192kg/m³ x 1425°C - ASTM C167 Cl.23 | — | — | — | 1 | kg | used | |
| STUDBOLT 1.25inch-8UN x 210lg. acc. ASME B16.5 - ASTM A193 Gr B16 | — | — | — | 346 | kg | used | |
| HEX NUT 1.25inch-8UN H=D acc. ASME B18.2.2 - ASTM A194 Gr 4 | — | — | — | 144 | kg | used | |
| TUBE Ø88.9/76.1x13475LG - 25Cr-35Ni-Nb - G 4852 MICRO | — | — | — | 19238 | kg | used | |
| TUBE Ø122/108 x 7MW x 11922LG - 35Cr-45Ni-Nb - ET 45 MICRO | — | — | — | 12845 | kg | used | |
| TUBE Ø122/108 x 7.0MW x 246.5LG - 25Cr-35Ni-Nb - G 4852 MICRO | — | — | — | 132 | kg | used | |
| TUBE Ø182.1/165.1x12174LG - 35Cr-45Ni-Nb - ET 45 MICRO | — | — | — | 35280 | kg | used | |
| TUBE Ø182.1/165.1x12826LG - 35Cr-45Ni-Nb - ET 45 MICRO | — | — | — | 12377 | kg | used | |
| TUBE Ø182.1/165.1x1500LG - 35Cr-45Ni-Nb - ET 45 MICRO | — | — | — | 1447 | kg | used | |
| TUBE Ø122/108 x 7.0 MW x 355.5LG - 25Cr-35Ni-Nb - G 4852 MICRO | — | — | — | 192 | kg | used | |
| ELBOW 90° ID=108 - 25Cr-35Ni-Nb - G 4852 MICRO | — | — | — | 1085 | kg | used | |
| RETURN BEND 180° ID=165.1 - 35Cr-45Ni-Nb - ET 45 MICRO | — | — | — | 3283 | kg | used | |
| RETURN BEND 180° W. OFFSET LUG ID=165.1 - 35Cr-45Ni-Nb - ET 45 MICRO | — | — | — | 2832 | kg | used | |
| RETURN BEND 180° WITH LUG ID=165.1 - 35Cr-45Ni-Nb - ET 45 MICRO | — | — | — | 2688 | kg | used | |
| LAP JOINT REDUCER ID=305/420 - 0.1C 20Cr-32Ni-Nb - G 4859 | — | — | — | 1020 | kg | used | |
| LINER ID=305 HT=290 - 0.1C 20Cr-32Ni-Nb - G 4859 | — | — | — | 420 | kg | used | |
| WYE FITTING INLET ID=2x76.1/108 - 25Cr-35Ni-Nb - G 4852 MICRO | — | — | — | 864 | kg | used | |
| WYE FITTING INTERMEDIATE ID=2x108/165.1 - 35Cr-45Ni-Nb - ET 45 MICRO | — | — | — | 912 | kg | used | |
| WYE FITTING OUTLET ID=2x165.1/305 - 0.1C 20Cr-32Ni-Nb - G 4859 | — | — | — | 1368 | kg | used | |
| THERMOWELL CAST TEE ID=165 - 0.1C 20Cr-32Ni-Nb - G 4859 | — | — | — | 1008 | kg | used | |
| CAST CAP - 25Cr-35Ni-Nb - G 4852 MICRO | — | — | — | 134 | kg | used | |
| CAST CAP - 35Cr-45Ni-Nb - ET 45 MICRO | — | — | — | 288 | kg | used | |
| SUPPORT PLATE 38x30x20 - ASTM B409 UNS N08811 | — | — | — | 5 | kg | used | |
| HEX. BUSHING - ASTM B408 UNS N08810/11 - 1.4876H/HT | — | — | — | 29 | kg | used | |
| THERMOWELL - ASTM B408 UNS N08810 | — | — | — | 22 | kg | used | |
| TOP OF THERMOWELL - CoCr26W - Stellite 6 | — | — | — | 7 | kg | used | |
| LAP JOINT FLANGE 18inch 300# acc ASME B16.5 - ASTM A105 | — | — | — | 1536 | kg | used |
Interested in this lot?
- Offers Close
- Nov 12, 2026, 8:00 AM UTC (4:00 PM GMT+8 at the lot)
Create a free account or log in to submit an offer on this lot.
Don't have an account? Sign up free
Lot Details
- Lot ID
- 2569
- Category
- Tubulars
- Subcategory
- none
- Condition
- Used
- Inventory Type
- Surplus
- Currency
- USD
Location
- City
- Kerteh
- State
- Terengganu
- Country
- Malaysia
Terms & Conditions
The Buyer must submit full payment within 5 days of receipt of Requis Invoice, including applicable taxes, fees, and export fees (if applicable), to avoid late fees as specified in the Terms of Use. Payment can be made by wire transfer directly to Requis, details of which will be in the invoice. For any questions on payment, please get in touch with sales@requis.com
All sales are subject to buyer vetting. The seller will review the highest offers within 5 to 10 business days of the closing date. If your offer is accepted, you will receive an invoice to complete the sale. If it is rejected, you will be notified, and no sale will occur between you and the seller.
Inspections are available upon request.
No load-out assistance available at the location. Buyer will be responsible for all fees, costs, and logistics associated with loadout.
If you need financial accommodations, please email sales@requis.com or your account manager.
For any questions, please reach out to sales@requis.com.