Lot-2369: Rotating Equipment and piping MRO (Quantity: 263 ea - Unused)
TubularsnoneUnusedTengiz, Atyrau Region, Kazakhstan
Lot #2369
1 / 29
Description
Lot-2369: Rotating Equipment and piping MRO (Quantity: 263 ea - Unused) Please see full inventory details in the assets table below. Buyer Premium: a 15% buyer premium will be added to bid amount and applied to final invoice. Please bid accordingly. NOTE: The above-listed quantities are believed to be an accurate representation of the available assets. It is the Buyer's responsibility to verify quantities at the time of pick up. No adjustments will be made for discrepancies within +/- 5% of the listed quantities. Any adjustments will need to be approved.
Attachments0
No attachments available
Supporting documents for this lot have not been added yet.
Assets in Lot32
| Name | Manufacturer | Model | SKU | Quantity | Units | Condition | Description |
|---|---|---|---|---|---|---|---|
| Sulzer Pumps UK LTD - RING WEAR IMPELLER 450MM ID 470MM OD 75 1MM THK INCLUDES 3 GRUB SCREWS PER RING A351-CF3M+STELLITE 6 FOR SULZER PUMP MODEL SM 502-720-1 S/N 42981-001/002 ITEM 503.00 | — | — | — | 1 | EA | Unused | |
| Tyco Fire&Intergrated Solution - SET TYPE SPRING & WASHERS VALVE SIZE SIZE MATERIAL INC X750 COLOR TYPE ASSY C/W 2 WASHER 316 SS SPARES FOR RELIEF VALVES | — | — | — | 5 | ST | Unused | |
| John H Carter Co., Inc - BALL VALVE DIAMETER VALVE SIZE 14 IN MATERIAL CR PLTD CG8M 14 IN V150 NS FOR VEE BALL VALVE HARMONIZED SYSTEM (HS) CODE 8481900000 | — | — | — | 1 | EA | Unused | |
| KTS Energy Solutions Limited - BALL VALVE DIAMETER VALVE SIZE 1 IN X 1-1/2 IN MATERIAL INCONEL 718 FOR BALL RVO 17934/17935 DW DE02/2276 | — | — | — | 2 | EA | Unused | |
| Siemens LLP - ASSEMBLY TYPE VALVE SIZE MATERIAL CONSIST OF CONTROL COVER WITH ELECTRICAL MONITOR CABLE SOCKET MN R9000780184 LFA 25 E76-63/CA20EQ6G08V | — | — | — | 1 | EA | Unused | |
| Siemens LLP - BEARING SLEEVE TYPE JOURNAL INSIDE DIAMETER 140 MM OUTSIDE DIAMETER 255 MM LENGTH 135 MM MATERIAL TILTING PAD FOR LOW STAGE OF WET SOUR GAS COMPRESSORS MODEL 10MV6B SN 9269/9270 | — | — | — | 2 | EA | Unused | |
| Thomas Kurze GMBH - LINEAR LOW DENSITY POLYETHYLENE SHRINKWRAP WIDTH 7M X LENGTH 15M. 300 M MICRONS IN WHITE. FLAME RETARDANT BC08 | — | — | — | 184 | EA | Unused | |
| Flowserve BV FSD - KIT REPAIR FOR GOULDS EVAPORATOR RECIRCULATION PUMP 63-G-9116 CONTAINS MECHANICAL SEAL | — | — | — | 1 | EA | Unused | |
| JOHN CRANE MIDDLE EAST FZE - KIT TYPE REPAIR APPLICATION FOR MECHANICAL SEAL | — | — | — | 4 | EA | Unused | |
| Tyco Fire&Intergrated Solution - KIT TYPE REPAIR APPLICATION FOR 1 IN X 2 IN PRESSURE RELIEF VALVE MODEL 1XDX2 JBS-E-35-K-SPL CONTAINS A (1) SPRING WITH WASHERS PN X07521 CONTAINS B (1) CONTAINS C (1) BELLOWS PN 180355-122684 CONTAINS D (1) DISC SEAT PN 9704 CONTAINS E (1) NOZZLE RING PN 103188 NOZZLE PN 103185 DISC HOLDER PN 147151 GUIDE PN 103196 CONTAINS F (1) 316 SS SCREW SEAT (1) GUIDE PN 103186 | — | — | — | 5 | EA | Unused | |
| Tyco Fire&Intergrated Solution - KIT TYPE REPAIR APPLICATION FOR PRESSURE RELIEF VALVE MN 1 5 E-2 JBS-E-65-K-BLK CONTAINS A (1) NOZZLE PN 200992 CONTAINS B (1) NOZZLE RING PN 146224 CONTAINS C (1) SET SCREW PN 220028 CONTAINS D (1) DISC INSERT PN 148995 CONTAINS E (1) BELLOWS & ADAPTER ASSY PN S97396 CONTAINS F (1) DISC HOLDER PN 152286 (1) GUIDE PN 122013 (1) SPINDLE ASSY PN S100633 (1) SPRING C/W WASHERS (112226 ) PN SX15046 | — | — | — | 1 | EA | Unused | |
| Tyco Fire&Intergrated Solution - VALVE RELIEF TYPE PRESSURE SAFETY MODEL CODE SET PRESSURE 10 BAR INLET SIZE 1 IN INLET CONNECTION RF FLG OUTLET SIZE 2 IN OUTLET CONNECTION RF FLG DESIGN RATING 300 LB X 150 LB BODY MATERIAL SS TRIM SS OPERATED PILOT TEMPERATURE RATING 85 DEG C | — | — | — | 4 | EA | Unused | |
| Tyco Fire&Intergrated Solution - VALVE RELIEF TYPE PRESSURE SAFETY MODEL CODE SET PRESSURE 10 BAR INLET SIZE 1 IN INLET CONNECTION RF FLG OUTLET SIZE 2 IN OUTLET CONNECTION RF FLG DESIGN RATING 300 LB X 150 LB BODY MATERIAL SS TRIM SS OPERATED PILOT TEMPERATURE RATING 85 DEG C | — | — | — | 1 | EA | Unused | |
| Emerson Automat. SOL Final CNTL Sales NL - VALVE RELIEF TYPE SAFETY SELECTOR MODEL CODE SET PRESSURE INLET SIZE 3 IN INLET CONNECTION RF FLG OUTLET SIZE 4 IN OUTLET CONNECTION RF FLG DESIGN RATING 150 LB BODY MATERIAL TRIM SS OPERATED TEMPERATURE RATING 800 DEG F | — | — | — | 2 | EA | Unused | |
| JOHN CRANE MIDDLE EAST FZE - SLEEVE FOR PUMP T1-T4G303 MAIN MECH.SEAL SLEEVE 316 S.S /CHROME OXIDE ITEM 11 | — | — | — | 8 | EA | Unused | |
| Sulzer Pumps UK LTD - SHAFT PUMP C/W KEYS ASSEMBLY 54 5MM DIA X 4105MM LG BS970 708M40 FOR SULZER PUMPS MODEL VCR 6X10X16AA/4s S/N 42896 42897 ITEM NO. 211.01 | — | — | — | 1 | EA | Unused | |
| Sulzer Pumps UK LTD - IMPELLER PUMP 600MM OD X 300MM THK 115MM ID SHAFT DIA ASTM A352 LCB FOR CRUDE PRODUCT AND DESALTER FEED PUMPS MODEL VCR-D 18X28X32A SN# 42363-001/2 AND 42364-001/2 PART NO. 230.01 | — | — | — | 1 | EA | Unused | |
| Sulzer Pumps UK LTD - IMPELLER PUMP 600MM OD X 300MM THK 115MM ID SHAFT DIA ASTM A352 LCB FOR CRUDE PRODUCT AND DESALTER FEED PUMPS MODEL VCR-D 18X28X32A SN# 42363-001/2 AND 42364-001/2 PART NO. 230.01 | — | — | — | 1 | EA | Unused | |
| Sulzer Pumps UK LTD - IMPELLER PUMP 3 VANE 177MM OD X 70MM THK X 35MM ID SHAFT SIZE ASTM A352 LCB C. STEEL 2nd - 7th STAGE FOR SULZER PUMP MODEL VCR 3X4X11A S/N 42898 PART NO. 230.01 ON | — | — | — | 6 | EA | Unused | |
| Sulzer Pumps UK LTD - IMPELLER PUMP 8 VANE 177MM OD X 70MM THK X 35MM ID SHAFT SIZE ASTM A352 LCB C. STEEL 8th - 15th STAGE FOR SULZER PUMP MODEL VCR 3X4X11A S/N 42898 PART NO. 230.02 | — | — | — | 8 | EA | Unused | |
| Siemens LLP - TRANSMITTER DIFFERENTIAL PRESSURE SHORT MODEL CODE EJA530A LONG MODEL CODE EJA530A-EBS7N-04DF-KU21-D3-M15-T06 INPUT RANGE 0.1-2 MPA OUTPUT RANGE SUPPLY RATING 10.5-30 VDC WORKING PRESSURE 0.1-2 MPA SIZE/CONNECTION 1/2 IN MNPT PROCESS X M20 FEMALE ELECTRICAL TYPE GA MATERIAL SUS316L CONNECTION HAST C-276 DIAPHRAGM SUS304 MOUNTING BRACKET 93 DEG 60 C IN ASSY WITH 2-VALVE MANIFOLD (PROCESS CONNECTION) & MOUNTING KIT(BRACKET WITH HARDWARE) AGCO MANIFOLD CODE M25B | — | — | — | 2 | EA | Unused | |
| Siemens LLP - TRANSMITTER DIFFERENTIAL PRESSURE SHORT MODEL CODE EJA530A LONG MODEL CODE EJA530A-EBS7N-04DF/KU21/D3/M15/T06 INPUT RANGE 0.1-2 MPA OUTPUT RANGE SUPPLY RATING 10.5-30 VDC WORKING PRESSURE 0.1-2 MPA SIZE/CONNECTION 1/2 IN MNPT PROCESS X M20 FEMALE ELECTRICAL TYPE GA MATERIAL SUS316L CONNECTION HAST C-276 DIAPHRAGM SUS304 MOUNTING BRACKET 93 DEG 60 C IN ASSY WITH 2-VALVE MANIFOLD(PROCESS CONNECTION) & MOUNTING KIT(BRACKET WITH HARDWARE) AGCO MANIFOLD CODE M25BVIS-4-BM3 | — | — | — | 3 | EA | Unused | |
| Nuovo Pignone International S.R.L. - GAUGE DIFFERENTIAL PRESSURE RANGE 0-4 BAR DIAL SIZE 6 IN SIZE/CONNECTION 1/4 IN FNPT CASE MATERIAL 316 SS TUBE MATERIAL CONNECTION MATERIAL HAST C276 CONNECTION LOCATION LOWER MOUNT FILLED MN 227C BELLOWS MATERIAL INC WETTED O-RING FLUOROCARBON COMPOUND PARKER V1238-95 MAX. STATIC PRESSURE 520 BAR FLUID SOUR HC GAS MOUNTING ON STAND | — | — | — | 2 | EA | Unused | |
| Sulzer Pumps UK LTD - COOLER OIL AIR BLAST MAX WORK PRESS 14 0 BARG TEMP RANGE -20 TO +150 C FOR SULZER PUMPS TYPE MSD-D 14-16-18.5 ITEM 15 ON DWG DL 9660-02/03 | — | — | — | 2 | EA | Unused | |
| Flowserve BV FSD - SEAL MECHANICAL 215MM OD SHAFT O-RING 150MM DIA BORE CARTRIDGE 316SS 210MM LG FOR SULZER PUMP MODEL SM 502-720-1 S/N 42981-001/002 | — | — | — | 1 | EA | Unused | |
| Flowserve BV FSD - SEAL MECHANICAL 215MM OD SHAFT O-RING 150MM DIA BORE CARTRIDGE 316SS 210MM LG FOR SULZER PUMP MODEL SM 502-720-1 S/N 42981-001/002 ON DRW 842944 | — | — | — | 1 | EA | Unused | |
| Flowserve BV FSD - SEAL MECHANICAL X-200 CARTRIDGE DUAL METAL BELLOWS 95MM IDX205MM ODX127MM THK 316SS/BUNA/PAPER FOR EVAPORATOR PACKAGE PUMP | — | — | — | 1 | EA | Unused | |
| Breda Energia S.p.A - ASSEMBLY TYPE SIZE MATERIAL GATE FOR BREDA VALVE 8 IN CLASS 900 RTJ SN M01578 | — | — | — | 1 | EA | Unused | |
| Novus Sealing Caspian LLP - GASKET RING JOINT PIPE SIZE PRESSURE RATING API NUMBER R79 MATERIAL TP316/316L SS DUAL GRADE STAINLESS STEEL SPECIFICATION SHAPE OCTAGONAL HARDNESS MAX BHN 160 HB CERTIFICATE CERTIFIED TO NACE MR0175/ISO 15156 MATERIALS TEST REPORT REQUIRED TYPE KAMMPROFILE SIZE PITCH DIA 1250 MM FINISH | — | — | — | 4 | EA | Unused | |
| FMC Technologies SA - METER TYPE ROTARY READOUT STYLE RANGE REGISTER VOLUME 8 L 2 IN RF 300LB SMITH MODEL C2-S6 IS NEW NUMBER LC2-S6-THIS NUMBER IS OBSOLETE (DEPLETE) METER WITH STD (CW LEFT TO RIGHT FLOW) CONFIGURATION LPG TRIM 2IN DBL CASE STRAIGHT THROUGH ROTARY VANE POSITIVE DISPLACEMENT METER LINEAR FLOW RANGE 4.5 TO 25 M3/H. COMPLETE WITH MODEL 621-L FIVE LARGE DIGIT RESETABLE TOTALIZER EIGHT SMALL DIGIT NON RESET COUNTERS - UNITS ARE LITERS MODEL 350C FIVE DIGIT PRESET COUNTER WITH ZERO START 4 SPDT MICRO-SWITCH AND CONTROL HANDLE KIT SIDE MOUNTED EEX D IIC T6 IP66 WITH ONE ENTRY M20 X 1.5 ISO | — | — | — | 1 | EA | Unused | |
| Cameron Limited - BASKET FILTER 10IN DOUBLE WALLED 316SS MN 18IN VERTICAL FILTER SN 205360 FOR SOUR GAS MOLECULAR SIEVES | — | — | — | 5 | EA | Unused | |
| Bel Valves - ACTUATOR ELECTRIC MOTOR TORQUE GEAR RATIO ELECTRICAL RATING 380 VAC 12.4 A 3 PH 50 HZ 10.82 KW SPEED 192 RPM TYPE FOR 24 IN CL600 BEL VALVE ACTUATOR CONTAINS GEARBOX WITH BEARINGS ACTUATOR MODEL IQ91F25B4 SPEED192.GEARBOX TYPE IS19 | — | — | — | 1 | EA | Unused |
Interested in this lot?
- Offers Close
- Nov 10, 2026, 11:00 AM UTC (4:00 PM GMT+5 at the lot)
Create a free account or log in to submit an offer on this lot.
Don't have an account? Sign up free
Lot Details
- Lot ID
- 2369
- Category
- Tubulars
- Subcategory
- none
- Condition
- Unused
- Inventory Type
- Surplus
- Currency
- USD
Location
- City
- Tengiz
- State
- Atyrau Region
- Country
- Kazakhstan
Terms & Conditions
The Buyer must submit full payment within 5 days of receipt of Requis Invoice, including applicable taxes, fees, and export fees (if applicable), to avoid late fees as specified in the Terms of Use. Payment can be made by wire transfer directly to Requis, details of which will be in the invoice.
VAT: For local sale where assets remain in Kazakhstan : Requis invoice to Buyer will include a 16% VAT in addition to Bid Amount and Buyer Premium. For international sales where assets are exported out of Kazakhstan , VAT is not applicable and will not be included in Requis invoice. Proper export documentation will need to be provided, or 16% VAT will need to be charged. Additional Important Terms and Buyer Responsibilities: The high bidder will be subject to additional vetting and screening before bid acceptance and removal of assets. Buyer must execute (sign, stamp, and return) the Requis Bill of Sale within 48 hours of receipt. Buyer must remit payment in full via wire transfer within 5 days of receipt of the Requis Invoice. Buyer will be responsible for all logistics and costs associated with inspections. Buyer must provide a written plan/strategy for exportation of the materials along with the offer to Requis. Any offers submitted without this documentation will not be valid. The high bidder must complete and sign the End User Declaration upon bid acceptance. This is a requirement to execute a sale.
Inspection available upon request and to be scheduled at least one week before the site visit and prior to the cutoff date.
Shipping, transportation and logistics options are available. For additional information please contact Requis:Karimzhan Nurbekov karimzhan.nurbekov@requis.com - Mobile: +7 701-559-7098 Loadout : Seller will load material onto Buyer's transportation vehicle free of charge. Buyer must provide Requis and the location a minimum of 14 days advance notice. Buyer must provide written plan/strategy for removal of the materials. Buyer must adhere to all HSE guidelines and procedures at the location. Buyer is responsible for checking/confirming any and all export status, fees and documentation for export of assets. Abandonment : Buyer must remove all materials included in this Lot within 45 days from receipt of Requis invoice. Any materials not removed within 45 days will be considered abandoned, and no refunds will be processed.
Buyer must remit payment in full via wire transfer within 5 days of receipt of Requis Invoice . VAT: For local sale where assets remain in Kazakhstan : Requis invoice to Buyer will include a 16% VAT in addition to Bid Amount and Buyer Premium. For international sales where assets are exported out of Kazakhstan , VAT is not applicable and will not be included in the Requis invoice. Proper export documentation will need to be provided, or 16% VAT will need to be charged. If you need financial accommodations, please email sales@requis.com or your account manager.
Contact:Karimzhan Nurbekov karimzhan.nurbekov@requis.com Mobile +7701 559 7098